Page 3 of 16
Re: IP Joiner Thread (Hosters please keep this current)
Posted: Thu Jun 21, 2007 11:50 pm
by paisano
CB wrote:ADD CHANGES TO THE BOTTOM OF THIS THREAD WHEN SERVER GOES DOWN
Post your IP Joiner info here if it needs to be udated.
If you need AC's IP Joiner get it here:
IpJoiner 3
http://h1.ripway.com/frankou8it/ipjoiner3.zipSomeday this may be the only way we can play folks
List of current active servers: as of 3-18-07
Dash, MI banlist, CB's Lush Maps,
I will keep this updated, please post any working ip's. I suggest using the original ip joiner and editing your IpJoiner pref.cs file and deleting the IpJoiner pref.cs.dso after making any changes.* = "working server's"
I//Art Crazy's IP Joiner Code File
//v3.0
//Preferences:
$IPJoiner::AutoSaver::Keybind = "alt p";
$IPJoiner::SaveIP[1] = "71.241.121.19:28008";
$IPJoiner::SaveName[1] = "CB Lush Maps";
$IPJoiner::SaveIP[2] = "71.241.121.19:28012";
$IPJoiner::SaveName[2] = "Craps *Maps (stock lush)";
$IPJoiner::SaveIP[3] = [b]not working"ENC14379C95DD392AE1B0452353AFC7F2E9893B1BB9E2FAD634D065FD 252C2";
$IPJoiner::SaveName[3] = "Craps * MapsCB";
$IPJoiner::SaveIP[4] = "ENC15949990C31764 31826E394E64BB1687A4B8D A122FAC E108FD352B32E";
$IPJoiner::SaveName[4] = "DASH BASH(Stock)";
$IPJoiner::SaveIP[5] = "ENC14129990C31764 31826E394E64DDBF4A269A42BF51243C2959DA88CCAD0";
$IPJoiner::SaveName[5] = "MI: Banlist Lush Indy";
$IPJoiner::SaveIP[6] = "68.41.223.63:28000";
$IPJoiner::SaveName[6] = "Repents";
[/b]
Where is roo's server info for scrumodz??!!!
Thanks!
Posted: Fri Jun 22, 2007 12:10 am
by stinkfingers
not all of us speak this tongue...
can someone start fresh and list the sequential instructions for how to install on a mac?
pretty please.
Official IPJoiner listing
Posted: Fri Jun 22, 2007 12:36 am
by paisano
//Art Crazy's IP Joiner Code File
//v3.0
//Preferences:
$IPJoiner::AutoSaver::Keybind = "alt p";
$IPJoiner::SaveIP[1] = "204.11.32.247:28000";
$IPJoiner::SaveName[1] = "blind Cides banlist indy scrum";
Posted: Fri Jun 22, 2007 12:52 am
by Baba
I followed the instructs for the ipjoiner3 (readme.txt is part of download)
I too am Mac and was frustrated at lack of common sense instructs that didnt say silly things like "alt p".
People who write these things are not the ones to explain them - it already makes sense to them.
I got it working based on the read me, but even after loading the ip #'s in the IPJoinerPreferences.cs
they would not show up in the TT server window. I would have to manually type in numbers. Then the servers would open.
I just cut and pasted these lists of ip's into the file (IPJoinerPreferences.cs) but they did not show in server list
Posted: Fri Jun 22, 2007 5:58 am
by CB
Roo's scrum mods is not on the list because Roo is having trouble getting it to work. Other wise the list is good. The list can't get updated unless the hosters post new info's in this thread. ..
Currently the only working server on the list for me are : DB, CB'S (stock lush), and repents.
Posted: Fri Jun 22, 2007 6:27 am
by PEST
I also copied and pasted them onto the end of my existing list, and they didn't work...then I changed the numbers in brackets (eg. SaveIP[x] and SaveName[x]) to sequential numbers and then it worked ok.
Posted: Fri Jun 22, 2007 4:23 pm
by stinkfingers
again: a request...if anyone has the time.
the procedures for this operation seem unclear from the preceding posts. any chance of a sequential, up to date description of how to go about installing and using the IP joiner?
Posted: Fri Jun 22, 2007 4:49 pm
by CB
Look me up on yahoo messenger tonight , I'll walk ya through it. My ym name is crapblaster04
Posted: Fri Jun 22, 2007 4:50 pm
by Sparrow©
Here's my Scrum Lush, Battle Mode Lush, and Sparrow's TS Server (Running Roo's Maps)
$IPJoiner::SaveIP[1] = "ENC10429DBD6EB7CB2B12AB3D6D30DAA4DC7816EC56 77BB3C9974EA58C2919";
$IPJoiner::SaveName[1] = "Sparrow's TS Server©";
$IPJoiner::SaveIP[3] = "ENC15899DBD6EB7CB2B12AB3D6D30DAA4DC7817D515F635 B8123F0 01B6A11";
$IPJoiner::SaveName[3] = "Battle Mode Lush";
$IPJoiner::SaveIP[4] = "ENC10769DBD6EB7CB2B12AB3D6D30DAA4DC7817D515F756B9635F332EFF8E 3";
$IPJoiner::SaveName[4] = "Scrum Lush©";
Posted: Fri Jun 22, 2007 5:05 pm
by Baba
^ these long IP Numbers (mixed with letters) do not work in my ip Joiner (3) version.
When I try to place them in the window I get a wrong format type of error.
It wants a xx.x.x.xxx:28001 type format.
is there something I am missing?